ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: Say10 15FX 16FXS on March 31, 2016, 01:38:32 AM
-
I had to remove the rubber side covers on my 2015 FX. After refitting, the two plastic push rivets that hold the two tabs in the front above the heat sink kept falling out. Noticed that the 2016 had an improved design that was a little longer and therefore held better. Here is the part#
90-08038
You'll need 2. Less than a buck fer both!