1
Zero Motorcycles Forum | 2013+ / Post Hibernation Firmware Update Issue, 2020 SR/F
« on: March 31, 2024, 04:36:51 PM »
When I "woke up" the bike I saw the "firmware update available" message and figured, why not, I had nowhere to be, so I clicked OK. The console switched to a cool new "Updating Firmware" message. 2 Hours later, same message and no progress, and my Key would not respond (I could not turn the bike off). I figured if I plugged in the L2 charger, perhaps it would trick the bike into a reset, and that worked (good news, no trip to the dealer!). When I unplugged the charger I could turn the bike on and off again normally.
I was then able to use the app (iOS) to update BMS and MBB to the latest without issue (what I should have done in the first place). So, if you get stuck like I did, plugging in the charge port might get you back to normal.
Then I cleared the error code 8 using the menu on the bike and went for a ride.
Steve
I was then able to use the app (iOS) to update BMS and MBB to the latest without issue (what I should have done in the first place). So, if you get stuck like I did, plugging in the charge port might get you back to normal.
Then I cleared the error code 8 using the menu on the bike and went for a ride.
Steve