ElectricMotorcycleForum.com

Makes And Models => Brammo Forum => Topic started by: Mudface on April 21, 2019, 08:47:40 PM

Title: Electrical resistance on the Parker GVM 142 on the Empulse R
Post by: Mudface on April 21, 2019, 08:47:40 PM

Does anyone know or can figure out what it should be?

I brought mine in for a repair because of a coolant leak from the motor.
that has been fixed but the refurbisher told my the insulation to the motor housing was very low.

Did i ride a motorcycle that could have electrocuted me or has something been re-assembled wrong?

I hope that some one here can help me out a bit.

Mudface

Title: Re: Electrical resistance on the Parker GVM 142 on the Empulse R
Post by: Mudface on June 26, 2019, 05:15:50 PM

Coolant leak is fixed  8)

Bike is running  :D

But it died on me twice on the freeway with an S85 error (encoder fault) :o

Any one an idea what the cause could be?

Title: Re: Electrical resistance on the Parker GVM 142 on the Empulse R
Post by: Mudface on July 12, 2019, 06:12:00 PM

Rode the bike without any problems so far after the 2 errors. :D