ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: E-zero on February 27, 2017, 07:45:15 PM
-
Hi guys!
I´ve been trying to find info on this subject without result that is why I´m opening this discussion.
I bought my second hand DS13 with removed onboard chargers so the only way of charging is via the aux port with external Delta Qs, now I´m trying to reconnect the Meanwell onboards back and I find;
AC Plug
+ & – Battery Plugs
And black connector labeled as 2s2p to batt (which looks like connected to the AC plug ground cable)
I have been reading a lot about a CANbus cable from charger to motorcycle to enable contactor but looks like my setup (13SDS setup?) does not work that way.
I don´t want to mess around and break the bike, battery that is why I am looking for a cabling diagram, images or info on connecting-disconnecting the charger.
The questions;
Do I need any other connection (canbus) in my onboard charger?
Would it be ok just reconnecting the cabling from my onboard? Will it enable the main contactor?
I would like to add additional fast chargers (Elteks), do I need to feed the contactor?
Sorry for the nobbynest here ;)
Any info will be thank in advance.
-
Some info is available on the wiki but tends to cover the 2014+ Calex charger. The wiring diagram linked from elsewhere in the manual doesn't have much detail there, though.
2s2p likely refers to the Meanwell configuration of 2 in series connected in two parallel banks.
http://zeromanual.com/index.php/Unofficial_Service_Manual#Charger