ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: victor6.7y on December 30, 2020, 06:25:03 PM
-
So I have my bike for a few months now and i noticed my BMS cover plug fell off during riding... :(
To cite the exploded view: "BMS COVER PLUG, 22MM PANEL HOLE SIZE, 0.8MM-2MM PANEL THICKNESS"
((http://Exploded view BMS Cover Plug.png))
So I 3D printed another one to put on. This time with the Zero Logo ;)
File is attached. You might want to scale it to 99 or 98%
Disclamer, This is a DIY thingy, use at your own risk..... not sure if there is risk but still :P
-
More images
-
There's a cover for the BMS lights? Where does it go?
-Crissa
-
On the front of the battery behind the front wheel. The ideal place for it, right where water gets sprayed from the tyre.
-
Oh don't forget to add a lot of grease and vasaline around te plug. That helps against the water