ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: Say10 15FX 16FXS on September 23, 2016, 05:02:04 AM

Title: Installing a SAE to USB plug on the FX/FXS
Post by: Say10 15FX 16FXS on September 23, 2016, 05:02:04 AM

Remove seat and right,left and center "tank" plastics. Find SAE connector under bundle of wiring on right side of frame. Plug in the 12" SAE/USB cable purchased on eBay or wherever for a few bucks. Route under frame to exit on left hand side of headstock. Replace covers and seat. You now have a USB to charge your phone, camera or whatnot. Only live when key is turned on.

Title: Re: Installing a SAE to USB plug on the FX/FXS
Post by: acacia1731 on September 23, 2016, 06:46:18 AM

Great post with detailed pics, thanks.

Topic also covered here, with a few additional options...
http://electricmotorcycleforum.com/boards/index.php?topic=3777.0 (http://electricmotorcycleforum.com/boards/index.php?topic=3777.0)