ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: Say10 15FX 16FXS on March 01, 2020, 09:31:15 PM

Title: After market foot pegs for FX/FXS and DS/DSR
Post by: Say10 15FX 16FXS on March 01, 2020, 09:31:15 PM

I found these billet pegs on eBay. Made for a 2008-9 Suzuki RMZ450. Similar to the aggressive pegs that Zero sells (Pro Taper for a Suzuki) at a fraction of the price. Around $40. Any pegs made for these years RMZ should fit the FX/FXS and DS/DSR. Here’s pics of them next to stock pegs and a link to eBay.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F163929767071

Title: Re: After market foot pegs for FX/FXS and DS/DSR
Post by: stargazerinwg on March 04, 2020, 02:02:05 AM

Thanks Say10 - great find!

Title: Re: After market foot pegs for FX/FXS and DS/DSR
Post by: stargazerinwg on March 17, 2020, 09:12:32 PM

Here's the Sixity footpegs I found on eBay based on Say10's post.  They came from California, and were delivered in just a few days.  They are allegedly titanium.
The pegs fit but needed some grinding on the stop in order to rotate to the level position.

Title: Re: After market foot pegs for FX/FXS and DS/DSR
Post by: KuRi on March 17, 2020, 09:34:33 PM

Looks Good! It would be a very nice replacement for mine because my wheels are also gold! :D

Title: Re: After market foot pegs for FX/FXS and DS/DSR
Post by: Say10 15FX 16FXS on March 19, 2020, 05:02:22 AM

I think they are “titanium” colored but made from aluminum. Very nice quality either way. I’ve got the aggressive pegs on my FX/FXS hybrid which I ground the inner couple cleats off on the left peg. The reason for this was that when folded up it appeared that these would gouge the frame in the result of a crash. Here’s the post about it.

https://www.electricmotorcycleforum.com/boards/index.php?topic=5956.msg53042#msg53042

Title: Re: After market foot pegs for FX/FXS and DS/DSR
Post by: stargazerinwg on March 19, 2020, 11:27:34 PM

May be titanium colored but they sure didn't machine like aluminum.

Title: Re: After market foot pegs for FX/FXS and DS/DSR
Post by: BrianTRice@gmail.com on April 14, 2020, 08:54:31 AM

I updated https://zeromanual.com/wiki/Footpegs with this fitment; thanks!