ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: Lipo423 on January 23, 2016, 01:45:02 PM

Title: Momentary error flashing while charging starts
Post by: Lipo423 on January 23, 2016, 01:45:02 PM

Have you guys experienced this?
It happens to me from time to time…when I plug the charger after a couple of seconds I see dashboard red warning signal flashing momentarily and then it stops…Do you guys know what this is?
It may has something to do with the line being protected (I have got an over voltage protector device), but I have also seen it without it  ???

Title: Re: Momentary error flashing while charging starts
Post by: BrianTRice@gmail.com on January 23, 2016, 01:51:23 PM

This is normal, but I don't remember what it represents.

Title: Re: Momentary error flashing while charging starts
Post by: Lipo423 on January 23, 2016, 02:07:26 PM

Thanks Brian,

As long as it happens to everyone, that's fine…I was getting a little worried after having had my charger replaced -coincidentally after such flashing-
It must be a kind of line/voltage testing, I guess.

Title: Re: Momentary error flashing while charging starts
Post by: Burton on January 23, 2016, 05:13:28 PM

I think this is often a isolation error in the logs if I recall correctly. But hard to tell without logs.

Getting a Diginow Reaper dongle and logging into the terminal then pulling the logs would give you the real reason :)