ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: warreninca on August 03, 2018, 11:11:06 PM

Title: any ideas: license plate frame?
Post by: warreninca on August 03, 2018, 11:11:06 PM

I've been using the dealer supplied frame. Any ideas/photos of something better?

Title: Re: any ideas: license place frame?
Post by: clockfort on August 03, 2018, 11:39:26 PM

I ended up making my own ( http://www.thingiverse.com/thing:1764732 )

Title: Re: any ideas: license place frame?
Post by: Doug S on August 04, 2018, 12:44:17 AM

I made my own too, though I didn't have my 3D printer until a couple of weeks ago. I abbreviated my quote as "Sunshine on asphalt" above, and "The best alarm clock" below the license plate.

Title: Re: any ideas: license place frame?
Post by: JaimeC on August 04, 2018, 03:49:57 AM

I used this as a good, waterproof place to store important paperwork since the storage "tankbag" leaked so badly:

http://www.aerostich.com/a-to-b-utilities/for-the-bike/license-plate-frames/license-plate-locking-compartment.html

Title: Re: any ideas: license plate frame?
Post by: Martin on August 27, 2018, 07:30:55 AM

My go to...

https://www.ebay.com/itm/Quad-LED-Curved-Motorcycle-License-Plate-Frame-Black-w-Taillight-Turns/281511340613

Title: Re: any ideas: license place frame?
Post by: DonTom on August 27, 2018, 11:49:03 AM

Quote from: clockfort on August 03, 2018, 11:39:26 PM

I ended up making my own ( http://www.thingiverse.com/thing:1764732 )

Didja make  an extra?

You may sell me one!

-Don-  Auburn, CA

Title: Re: any ideas: license plate frame?
Post by: hubert on August 27, 2018, 01:01:57 PM

Lucky US riders with small 4"x7" plates! In EU we have to wear bulky 130x210 plates, that's 5"x8-1/4" approx, no way to put a larger frame around it! I just added a quote within the plate stating "Zero Motorcycles, 100% electric, 0% poison".

Title: Re: any ideas: license plate frame?
Post by: MrDude_1 on August 27, 2018, 06:25:22 PM

Quote from: hubert on August 27, 2018, 01:01:57 PM

Lucky US riders with small 4"x7" plates! In EU we have to wear bulky 130x210 plates, that's 5"x81/4" approx, no way to put a larger frame around it! I just added a quote within the plate stating "Zero Motorcycles, 100% electric, 0% poison".

To be fair, your bike contains lead.

Title: Re: any ideas: license plate frame?
Post by: hubert on August 27, 2018, 09:44:05 PM

Nobody will eat the bike. But the exhaust fumes/gasses are clean. At least those of the electric bike, not the rider!

Title: Re: any ideas: license place frame?
Post by: Shadow on August 29, 2018, 12:33:23 AM

Quote from: DonTom on August 27, 2018, 11:49:03 AM

Quote from: clockfort on August 03, 2018, 11:39:26 PM

I ended up making my own ( http://www.thingiverse.com/thing:1764732 )

Didja make  an extra?

You may sell me one!

-Don-  Auburn, CA

The Reno Generator artist cooperative has a 3D printer. Looks like an easy print.