1
Zero Motorcycles Forum | 2013+ / Re: 2013 S: Speedometer calibration settings
« on: June 19, 2014, 05:28:29 PM »
I have a speedo-healer on my Goldwing and have it set a nudge high so I won't speed in school zones.
|
ElectricMotorcycleForum.com
- May 21, 2024, 02:17:38 PM
- Welcome, Guest
News:
Electric Motorcycle Forum is live!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Zero Motorcycles Forum | 2013+ / Re: 2013 S: Speedometer calibration settings
« on: June 18, 2014, 08:55:41 PM »
So, would changing the number to 1862 or 1871 make a change in smaller increments? Or, do these changes adjust something else?
3
Zero Motorcycles Forum | 2013+ / Re: 2013 S: Speedometer calibration settings
« on: June 18, 2014, 03:35:44 AM »For those interested, I found "1872" is a more accurate reading for the 2013 S speedometer
My factory setting was 1972, so I'm wondering if 1772 would be in error the other way?
4
Zero Motorcycles Forum | 2013+ / Re: 2013 S Belt Replacement
« on: April 14, 2014, 04:44:56 AM »
Photo would be nice.
5
Zero Motorcycles Forum | 2013+ / Re: Changing tires
« on: April 14, 2014, 04:21:12 AM »
I have a lift big enough for my gold wing, I just use it.
6
Zero Motorcycles Forum | 2013+ / Re: New firmware and everyting is at 0
« on: March 22, 2014, 02:51:14 AM »
My 2013 S is on the recall list, and I was afraid this was going to happen. At least now I know what to expect.
7
Zero Motorcycles Forum | 2013+ / Re: I got carried away
« on: March 22, 2014, 02:49:52 AM »
So how fast were you going when it shut down?
8
Zero Motorcycles Forum | 2013+ / zipper lube
« on: February 28, 2014, 08:17:53 AM »
I grabbed something at work. Not sure what it's called, but the label had the words, Teflon and dry on it. I used it sparingly.
9
Zero Motorcycles Forum | 2013+ / 2013 S: Speedometer calibration settings
« on: February 28, 2014, 05:26:35 AM »
Okay, so which numbers adjust the speedometer reading? And, which way do you make the numbers go to make the speed more accurate?
10
Zero Motorcycles Forum | 2013+ / zipper lube
« on: February 28, 2014, 03:58:03 AM »
This may be a no-brainer, but my take bag zipper has been a little rough, so I sprayed some dry lubricant on it and now it is very smooth. Just thought I'd share.
11
Zero Motorcycles Forum | 2013+ / Re: Speed stability at constant speed
« on: February 26, 2014, 05:02:44 AM »
I've had my 2013 S for about a year. I got it new and just turned over 14,000 miles on it on the way to work this morning. I too, have noticed this phenomenon. It's oddly comforting to know it's not just me! For me, I'm not overly concerned about it. My bike is on the recall list, so I hope having my firmware updated takes care of it. My bike has never quit running, so it's just kind of a nuisance.
12
Zero Motorcycles Forum | 2013+ / Re: Progress or lack thereof for the recalls. Anyone still waiting
« on: February 18, 2014, 01:45:22 AM »
I live in Texas and am waiting for my dealer to get the necessary cabling to make the connections. I received my recall notice in January.
13
Zero Motorcycles Forum | 2013+ / Re: Electrical motor bearing and grease
« on: February 16, 2014, 10:38:49 PM »
If you have at least a 2013 bike, it's my understanding that the motors are sealed.
14
Zero Motorcycles Forum | 2013+ / Re: Axle nut size
« on: February 15, 2014, 03:12:40 AM »
I called Zero. They said, 27mm.
15
Zero Motorcycles Forum | 2013+ / Axle nut size
« on: February 15, 2014, 02:26:13 AM »
I have a 2013 S. What size socket do I need to get for the rear axle nut?