OK, I've been following this thread and I've never had a glitch in the 1800 miles I've ridden so far.
Until today. Twice.
Both times, I was at a stop (turning left). I opened the throttle and the bike accelerated to about 3 mph, and then bang - dead.
I coasted/scooted the rest of the way through the intersection; and the carefully looked for issues.
The dash indicators were not on or blinking. The BMS LED's were normal. The charger was dark (of course). Don't know what else to look at.
"Rebooting" fixed it. I was in ECO mode.
I had just ridden a few miles; ambient was 80F; I doubt it had to do with heat.
When I got home I made a concerted effort around the neighborhood to make it happen again - several dozen starts-from-stops - worked fine.
My dash indicator shows 2011/u7/11 - but it doesn't sound like that's related to the "reprogramming".
I've reread this thread a couple of times,
Richard230, your glitch never happened when the bike was moving - have you had it happen again since your upgrade?
oobflyer - you haven't posted on the thread since your Apr30th upgrade - have you had it happen since?
rotoiti - it looks like you had it happen once since your upgrade - but it may have been heat related as after the reboot you saw the heat indicator?
I guess I'm wondering if the upgrade fixes "it". Or if "it" is a symptom of several problems ( heat related, software related, etc ) and the upgrade just fixes one of them?
Do you guys recommend emailing zero support or calling them?