ElectricMotorcycleForum.com
Tech => Tech Help => Topic started by: JeremyConnors on September 29, 2016, 06:16:38 AM
-
Can get a 5/8 socket in there, but that's not the right size of course. And metrics aren't fitting past 14mm... What are you guys using to get the radar shock off?
-
I believe that I used a thin walled ( good quality ) 15 mm to get mine off.
-
You don't state what vehicle you're trying to work on. It appears from your past post that you're referring to a 2013 Zero FX.
-
I don't imagine that the bolt would be different between models.
Frame and spacing might be, but, bolt should be the same.
-
+1 on the good quality 15mm socket (OEM bolt, '14 FX).
You might want to check out this thread (http://electricmotorcycleforum.com/boards/index.php?topic=4465.msg32394#msg32394) before you start, in case there's anything you may find helpful.
Ray