ElectricMotorcycleForum.com

Makes And Models => Zero Motorcycles Forum | 2012 and older => Topic started by: Doctorbass on April 28, 2012, 11:29:23 AM

Title: Your 2011 DS and S controller are re-programmable !!
Post by: Doctorbass on April 28, 2012, 11:29:23 AM

Since i am really familiar with ebike and e motorcycle controller programing, i decided to connect my laptop to my 2011 DS  using the  Controller PRO communication software ( the one that use the little serie RS-232 port) .. or also using the USB to 232 adapter to make it work.

I found that this controlelr CAN me reprogrammed !! ;)

so YES you can tune your zero performances a little bit ! ( might void the warranty so make it on your own risk!!)

You can download the software on the Alltrax website: http://www.alltraxinc.com/Products_ControllerPro.html (http://www.alltraxinc.com/Products_ControllerPro.html)

Even if you make erros and dont remind what was the original parameters, you can fid them here ( i recorded them from my new zero ds 2011 using the software)

http://electricmotorcycleforum.com/boards/index.php?topic=2079.0 (http://electricmotorcycleforum.com/boards/index.php?topic=2079.0)


Doc

Title: Re: Your 2011 DS and S controller are re-programmable !!
Post by: rotoiti on April 28, 2012, 09:27:59 PM

Nice -- thanks for the research. The hacker in me is tempted to try it on my 2012 DS but the accountant in me says to wait until after the warranty is over... :)

Title: Re: Your 2011 DS and S controller are re-programmable !!
Post by: Lipo423 on April 28, 2012, 11:41:01 PM

You are "an artist" Doctorbass!

Get the one for the ZF9 2012  ;)