ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: spelunker on March 28, 2013, 04:48:14 AM
-
If I plug my 2013 S's charger into a 220V circuit, will it charge in half the time? The specs say 120V or 220V.
-
No. The 2013 S should pull around 14A @ 110V or around 7A @ 220V from the wall.
-
So, I can charge it for half the cost at 220V.
-
If you pay for electricity by the amp-hour (regardless of 110V or 220V) then yes.
If you pay for electricity by the kilowatt-hour then you will pay the same regardless of 110v or 220v. (Not entirely true, 220v may be slightly more efficient.. but we're talking 1-2% here)
-
If you pay for electricity by the amp-hour (regardless of 110V or 220V) then yes.
If you pay by the amp-hour then you would be damn glad that the charger is Power Factor corrected! ;D
-
If you pay for electricity by the amp-hour (regardless of 110V or 220V) then yes.
If you pay for electricity by the kilowatt-hour then you will pay the same regardless of 110v or 220v. (Not entirely true, 220v may be slightly more efficient.. but we're talking 1-2% here)
Over here you can buy voltage reducers that drop mains from the average of 240 down to 220V which saves a fair bit of money each year apparently. Most appliances draw less current at a lower voltage, i don't know the science behind it but a lot of large businesses use them.