ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: peterwarm on February 14, 2021, 02:51:24 AM
-
Any one any idea what the headlamp connector in a SRF is?
I'm fitting an old police style fairing to my SRF and am after a connector to fit the SRF loom as shown.
any clue as to manufacturer would be brilliant.
Thanks
pete
-
Try here.....
http://www.autolumination.com/wiring-electrical-connectors/automotive-engine-chassis-sockets-wiring-connectors-harnesses-plugs/automotive-connectors-3pin.htm
-
Took a while but I found it
https://www.obdinnovations.com/4-pole-sealed-connector-set-for-hella-8kw744808801/
https://www.amazon.co.uk/sealed-automotive-connector-4-pole-Superseal/dp/B07GJKR3GR
-
This looks like something to put in the wiki.
-Crissa
-
Brilliant guys, thanks so much. Ive now traced this back to:
Amphenol 4-pole (4-way, 4-pin) 14A AMP Superseal 1.5, for 0.75-1.5mm2 wire
and found some Uk suppliers. Brilliant, thanks.
(cheapest was amazon at £2.50, else RSwww.com at £15 for 5)