ElectricMotorcycleForum.com
Marketplace => Buy Sell Trade => Topic started by: frodus on December 12, 2012, 03:06:16 AM
-
I've got a very good condition Camlight Systems CC400 discharger for sale. I've used it under 50 times, in a lab environment. I've been the only user and it's been taken care of.
According to Camlight, THESE ARE NO LONGER BEING MADE.
Specs:
- 400W maximum continuous discharge (at 86°F. or 30°C. ambient temperature, or lower).
- Up to 500W allowed for the first 15 seconds of a discharge (at 86°F. or 30°C. ambient temperature, or lower).
- Removing jumper allows continuous 500W discharges (at 86°F. or 30°C. ambient temperature, or lower). •
- 0.5V to 60V battery voltage range.
- Constant-Current Mode and Burst Mode: 1A-150A current (for 2V-60V cells/packs), selectable in 1A increments. Limited to 100A at 0.9V.
- Throttle Mode: 200mA-150A discharge current (for 2V-60V cells/packs), determined by maximum current setting and throttle, in as small as 50mA steps. Limited to 100A at 0.9V.
- In Throttle Mode, the CC-400 can be calibrated for different 0% - 100% throttle pulse width ranges.
- Accuracy is +/-35mA from 1A-20A and +/-1% from 21A to 150A (typically better than +/-0.6%).
- Uses two large terminal blocks so you can tailor your hookup to your needs, with up to 4AWG wire.
Manual:
http://www.camlight.com/techinfo/Camlight_CC-400_UserGuide.pdf (http://www.camlight.com/techinfo/Camlight_CC-400_UserGuide.pdf)
Includes:
CC400
Power supply
Original box
Servo driver for use without CBA discharger
I'm looking for $350 for everything, shipped USPS
-
SOLD