ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2012 and older => Topic started by: nicktulloh on May 03, 2013, 10:13:32 AM
-
Anyone know how to tighten the mirrors?
-
The collar around the ball joint the mirrors swivel on can be rotated to tighten or loosen the joint. On my 2012 bike there is a single very fine hex bolt holding it in place.
-
We had a thread last year maybe helpful too.
http://electricmotorcycleforum.com/boards/index.php?topic=2174.msg7580#msg7580 (http://electricmotorcycleforum.com/boards/index.php?topic=2174.msg7580#msg7580)
I have to admit my mirrors will become loos very often - had already thought to replace but i am not sure if other one are better.
-
I got a special tool from Harlan that is a pin wrench that fits the holes in the collar. Some hardware stores sell adjustable pin wrenches. Also, as I remember, there is a tiny Allen set screw down in one of those holes, that has to be loosened first. Look for that screw before attempting to rotate the collar!
Trikester
-
I got a special tool from Harlan that is a pin wrench that fits the holes in the collar. Some hardware stores sell adjustable pin wrenches. Also, as I remember, there is a tiny Allen set screw down in one of those holes, that has to be loosened first. Look for that screw before attempting to rotate the collar!
Trikester
Thanks much!