ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: Burton on September 03, 2014, 08:04:50 PM
-
I need brake light switches for Turbo as the rear banjo pressure switch doesn't work and the front brake master cylinder was replaced with a yamaha dirtbike one which doesn't appear to have a switch inline with it or a means to install one. -_-
Anyone know what part number / manufacture is for the rear pressure switch? I will likely have to replace the front master cylinder even though EC said it is better than the stock one since I cannot identify it. What size handlebars do we have again on the S model?
-
I have the rear brake lever/cylinder.. from my 2013FX off, I think it is the same as it is used on a 2013S.
There is no number or sign that tell me what brand or type it is. Sorry.
The front part I guess is different.
-
What size handlebars do we have again on the S model?
1-1/8" at clamp area and tapers to 7/8" for standard grips and controls. Not sure about the rise and rake.
-
Ordered some parts tonight.
I think the banjo bolt sensor is a 10mm x 1.25 pitch (standard nissin bolt) and the brakes I have might fit a RD350 Yamaha switch. I will find out some time next week most likely.
Thanks for the replies!
Now I need to make another license plate mount since my last one didn't work out so well :D
-
Hey guys, if you need any of these parts I think the fastest way would be to contact Hollywood Electrics. They should have all of the parts, excluding the Yamaha ones ;) You can get any Zero part from them.
-
I contacted Harland via email three days ago ... he likely is too swamped to reply :/
He was my first go to though :) The local guys don't know much -_-