ElectricMotorcycleForum.com
Makes And Models => Zero Motorcycles Forum | 2013+ => Topic started by: PhreaK on August 23, 2015, 05:29:47 PM
-
Just a heads up for any of the other Australians here - the R&G tail tidy kits don't fit Australian number plates without modification. Although the mount has slots, they're not quite wide enough to reach the span of the pre-drilled corner holes used on our plates.
After a bit of Google fu I opted to drill some two additional, closer holes in my number plate. From everything I've been able to find this is legal. That being said, I will be shifting the registration to another state when the current one lapses so will double check with the new transit authority before mounting the new plates. If that's a no-go, using a strong adhesive (e.g. 3M VHB) should do the trick - as long as I never need to remove it.
Anyway, much tidier now.
-
Yeah, I've never been hassled for extra holes in a number plate. One thing the cops here in SA defect bikes with a tail-tidy for is not having a separate red reflector on the tail; it doesn't look like you've got one. It's not such a bad thing to have, it might save your bike from being hit from behind when it's parked or if the tail light stops working, which is probably what it's meant for.
-
Yep, I've got the little reflector dot. Just wasn't fitted in that shot.
Sent from my iPhone using Tapatalk
-
Do not helpful and had very good knowledge.