Topic: Electrical resistance on the Parker GVM 142 on the Empulse R (Read 2119 times)

Mudface · « **on:** April 21, 2019, 08:47:40 PM »

Does anyone know or can figure out what it should be?

I brought mine in for a repair because of a coolant leak from the motor.
that has been fixed but the refurbisher told my the insulation to the motor housing was very low.

Did i ride a motorcycle that could have electrocuted me or has something been re-assembled wrong?

I hope that some one here can help me out a bit.

Mudface

Mudface · « **Reply #1 on:** June 26, 2019, 05:15:50 PM »

Coolant leak is fixed

Bike is running

But it died on me twice on the freeway with an S85 error (encoder fault)

Any one an idea what the cause could be?

Mudface · « **Reply #2 on:** July 12, 2019, 06:12:00 PM »

Rode the bike without any problems so far after the 2 errors.

ElectricMotorcycleForum.com

News:

Author Topic: Electrical resistance on the Parker GVM 142 on the Empulse R (Read 2119 times)

Mudface

Electrical resistance on the Parker GVM 142 on the Empulse R

Mudface

Re: Electrical resistance on the Parker GVM 142 on the Empulse R

Mudface

Re: Electrical resistance on the Parker GVM 142 on the Empulse R